OmaBoot? fixes
#WeCanFixEverything
OmaBoot? tests Macs from a live boot, and carries a few fixes that stock Omarchy doesn't have yet, so a Mac that needs one can still be tested. A report lists the fixes that took effect. Its results count for the configuration as usual, marked with OmaBoot? <fix>, linked to the fix's entry below. How each one works, and how a run shows it took effect, is on omaboot.live.
Where fixes really happen
A fix here is a stopgap. The lasting fix lands upstream, where every Mac gets it:
- Kernel drivers: the Linux kernel mailing lists and the subsystem's maintainers (listed in the kernel's
MAINTAINERSfile). - T2 and Apple hardware patches: t2linux, and its kernel patches.
- Omarchy itself: omacom/omarchy, and omacom/omarchy-pkgs for its
linux-omarchykernel. - Packaging: Arch Linux packaging.
Found what a Mac needs? Send it upstream, then tell us: once it ships in Omarchy, a new report turns the result green.
-
1. radeon panel clock fix
Corrects the built-in panel's clock in radeon's in-memory copy of the video BIOS's panel table: the BIOS says 108 MHz, the panel's EDID 138.5 MHz. Without it, the screen splits into distorted parts unless the Mac boots with nomodeset. It never writes the ROM. OmaBoot? Live also boots this Mac with radeon.dpm=0 radeon.pcie_gen2=0 radeon.uvd=0, as the install fix does: with radeon's defaults the GPU locks up under load.
Lives in Driver patch radeon, rebuilt for both kernels
Boot options radeon.dpm=0 radeon.pcie_gen2=0 radeon.uvd=0, on the iMac10,1 onlyHardware The 21.5-inch iMac10,1 with the Radeon HD 4670. It acts only on GPU 1002:9488 with subsystem 106b:00b6 driving a 1920×1080 panel, so every other Mac runs stock radeon. Configurations iMac (21.5-inch, Late 2009) [iMac10,1] · HD 4670 · 21.5-inch Criteria Internal display at native resolution, Discrete GPU acceleration Upstream omarchy-vintage-intel-imac-fix 0d5a406a31 (patches/panel-encoder-combined.patch) Tested on iMac (21.5-inch, Late 2009) [iMac10,1] · HD 4670 · 21.5-inch Since OmaBoot? dev 1d36b14 Report ID omaboot.radeon-imac10-1-panel-clockDetails How it works, on omaboot.live -
2. applesmc keyboard backlight fix
Fixes an oops while applesmc starts on Macs whose SMC has a keyboard-backlight key: t2linux patch 3001 takes the SMC's data from the backlight's LED device, which doesn't hold it. A one-line container_of fix. With it, fans, the light sensor and the keyboard backlight work in a live boot.
Lives in Driver patch applesmc, rebuilt for the T2 kernel
Driver settings the official live system's applesmc blacklist, removedHardware Macs without a T2 chip whose SMC has a keyboard-backlight key, booted on OmaBoot?'s T2 kernel (linux-t2), which carries the t2linux applesmc patches. Other Macs load it without harm. Criteria Keyboard backlight, Ambient light sensor, Fans respond to load Upstream t2linux kernel patches
Not upstream yet: a pull request to t2linux is planned.Tested on MacBook Air (13-inch, Mid 2012) [MacBookAir5,2]
iMac (21.5-inch, Late 2009) [iMac10,1] · HD 4670 · 21.5-inch
iMac (Retina 5K, 27-inch, 2017) [iMac18,3]Since OmaBoot? dev 1d36b14 Report ID omaboot.applesmc-led-container-ofDetails How it works, on omaboot.live -
3. lid wake fix
Arms the lid's wake only for a sleep that starts with the lid closed. On these Macs the lid's wake is a bit in the embedded controller, set before every sleep, so a sleep that starts with the lid open (Suspend from the menu, an idle suspend) is woken by the lid a few seconds in. A small systemd-sleep hook turns the lid's wake off in /proc/acpi/wakeup for such a sleep and back on after it; a sleep from closing the lid still wakes when it opens. OmaBoot? Live's sleep test naps once with the stock setting and, if the lid woke it, once more with the fix.
Lives in System service omaboot-lid-wake, a systemd-sleep hook Hardware Mac laptops whose lid wake goes through the embedded controller: the lid's ACPI _PSW sets a wake-on-lid-open bit. Found on the MacBook Air (13-inch, Mid 2012); every other Mac laptop whose ACPI tables were checked has the same pattern (8 models from 2009 to 2019, MacBook Pro and MacBook Air, in public hardware probes). It does nothing on a Mac without a lid, or when the lid is closed. Criteria Sleep and wake Upstream Omarchy (Apple hardware fixes in install/hardware/apple)
Not upstream yet: a proposal to Omarchy's Apple hardware fixes is planned.Tested on MacBook Air (13-inch, Mid 2012) [MacBookAir5,2] Since OmaBoot? dev 327b2e3 Report ID omaboot.lid-wake-closed-onlyDetails How it works, on omaboot.live -
4. Thunderbolt 3 USB wake fix
Keeps the Thunderbolt 3 chip's USB controller awake while OmaBoot? Live's USB-C test runs. On a Mac, Linux doesn't take the PCIe wake signal (PME) that powers the idle controller back up, so a USB 3 device plugged into a USB-C port is never seen; USB 2 devices are, through the Mac's main USB controller. When the test has waited 15 seconds with nothing seen while the controller sleeps, it turns the controller's runtime power management off (power/control on) and puts it back after the test. On an installed system, the kernel option pcie_ports=native does the same.
Lives in Driver settings runtime power management off for the Thunderbolt 3 chip's USB controller, during the USB-C test Hardware Intel Macs from 2016 to 2020 with Intel's Thunderbolt 3 chips (Alpine Ridge, Titan Ridge), whose USB-C ports' USB 3 lines run to the chip's own USB controller. It acts only while that controller is runtime-suspended, and only in the USB-C test. Criteria USB-C / Thunderbolt 3 ports (USB data) Upstream ACPI: PCI: take native PME control on Apple machines (Linux patch, September 2026)
Not merged yet. Until it is, pcie_ports=native on the kernel command line has the same effect: confirmed on an iMac (Retina 5K, 27-inch, 2017), whose USB-C stick then came up at 5 Gb/s.Tested on iMac (Retina 5K, 27-inch, 2017) [iMac18,3] Since OmaBoot? dev de06dfb Report ID omaboot.thunderbolt3-usb-awakeDetails How it works, on omaboot.live